Masalta MR75R Manual de Instruções descarregar pdf (Página 8)

Working Size (L x W x H): 76 x 43 x 102 cm

Transportation

1. Shutdown engine for transportation.

2. For transportation, tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

3. Drain fuel for transportation over long distance or bad road.

4. Secure machine firmly to prevent it from moving or tipping.

5. Rammer should be transported in such position as it is placed on level ground. In case of it must be laid

down for transportation, drain fuel tank as well as carburetor and make sure that oil plug is tightened

securely.

6. Direction to lay down the rammer, must be such that air cleaner comes to top. After laying it, make sure

that there is no leak of oil or residual fuel.

7. Make sure lifting device has enough capacity to hold machine (see identification plate on machine for

weight). Use central lifting point (a) when lifting machine.

8. Use trolley kit (supplied as optional) for short distance transportation.

Troubleshooting Guide

A. Rammer Troubleshooting

SYMPTOM POSSIBLE PROBLEM SOLUTION

Operating speed of throttle

lever is incorrectly set?

Set throttle lever to correct position.

Oil in excess? Drain excess oil. Bring to correct level.

Clutch slips? Replace or adjust clutch.

Spring Failure? Replace spiral spring.

Engine rotates

but amplitude

not uniform or

does not strike

Speed of engine improper? Adjust engine speed to correct operating RPM setting.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Masalta MR75R Manual de Instruções Página 8